Product ID:S-400 EPOXY PART A RESIN, 52-00-9045
MSDS Date:03/21/1989
FSC:8010
NIIN:00N043063
Kit Part:Y
MSDS Number: BRRCP

SUMMITVILLE LABORATORIES

MINERVA, OH 44657
US

Emergency Phone: 216-223-1511

Info Phone: 216-868-6463

Cage: SUMTV

SUMMITVILLE LABORATORIES

MINERVA, OH 44657 US

Telephone: 216-868-6463

Cage: SUMTV

BISPHENOL A DIGLYCIDYL ETHER RESIN

CAS: 25068-38-6

RTECS: SL6475000

Fraction By Weight: 50-90%

OSHA PEL N/K

ACGIH TLV: N/K

POLYSTYRENE

CAS: 9003-53-6

RTECS: WL6475000

Fraction By Weight: 3-20%

OSHA PEL N/K

ACGIH TLV: N/K

ALIPHATIC MONOGLYCIDYL ETHER; (ALIPHATIC EPOXIDE)

CAS: 68609-96-1

Fraction By Weight: 3-20%

OSHA PEL N/K

ACGIH TLV: N/K

SILICON DIOXIDE (AMORPHOUS)

CAS: 7631-86-9

Fraction By Weight: 1-6%

OSHA PEL 20 PPM (MFR)

ACGIH TLV: 5 MG/M3 (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:FREQUENT AND PROLONGED CONTACT WITH
EYES AND SKIN CAN CAUSE IRRITATION. INHALATION BY SENSITIZED
PERSONS MAY CAUSE ASTHMATIC TYPE RESPONSE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS, SENSITIVE
SKIN.

First Aid:SKIN:WASH THORO W/SOAP & H20. REMOVE CONTAMD CLTHG IMMED &
WASH SKIN. IF IRRIT PERSISTS AFTER WASHING, GET MED ATTN. EYES:WASH
IMMED W/LG AMTS H2O FOR @ LEAST 15 MIN, LIFTING UPPER & LOWER
EYELIDS OCC AS. GET MED ATTN IMMED. INHAL:REMOVE TOFRESH AIR IMMED,
GET MED ATTN. INGEST:IF PERSON CON, THEY SHLD DRINK LG AMT H2O
IMMED. INDUCE VOMIT. DO NOT INDUCE VOMIT IN UNCON PERSON. GET MED
ATTN IMMED.

Flash Point:300F,149C
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICALS.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:SOAK UP WITH ABSORBENT MATERIAL. SCRAPE UP AND
PLACE IN WELL CONSTRUCTED CONTAINER FOR REMOVAL. RESIDUE MAY BE
REMOVED USING A NON-FLAMMABLE SOLVENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP CONTAINER CLOSED OR COVERED.

Respiratory Protection:NIOSH/MSHA APPROVED CHEMICAL VAPOR CARTRIDGE
RESPIRATOR.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL):FOLLOW OSHA
STANDARD.
Protective Gloves:RUBBER OR POLYETHYLENE.
Eye Protection:CHEMICAL SAFETY GOGGLES .
Other Protective Equipment:THROW AWAY APRON OR SIMILAR FRONTAL COVER
GARMENT IS SUGGESTED.
Work Hygienic Practices:WASH HANDS THOROUGHLY.
Supplemental Safety and Health
KEY1;T6.

HCC:T6
Spec Gravity:1.0 (H2O=1)
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
AMINES AND AVOID CONTAMINATION WITH ACIDS AND OXIDANE CONTAINING
COMPOUNDS.
Conditions to Avoid Polymerization:AMINES, BASES, MERCAPTANS, STRONG
ACIDS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.